DIY Chandelier Crystal, Lapis, and Gold Necklace

Like my DIY bead bar necklaces, this is another super-simple tutorial. Take an octagonal chandelier crystal with holes drilled on opposite sides (you can buy these online, I found mine in the "Supplies" section of Etsy) and then pick out a teardrop shaped bead. I used one that's about an inch long, and made of lapis-colored glass since I really like the combination of white, blue, and gold together. You could also go with a pearl drop, green glass drop, or even a gold one. You could use a round bead as well, but I think the teardrop shape balances out the octagonal crystal better - I think you need something longer than the crystal to give it a lavalier-type look.

My chandelier crystal still had one original hanging wire attached, so I simply slipped a large gold jump ring onto it and then closed the loop. The crystal also had a drilled hole at the bottom, so I simple slipped a large gold jump ring through it, added the lapis, then closed it. I strung this onto gold-plated chain, and instantly had an elegant, vintage-inspired necklace to wear. So easy, right? I think it looks very 1920s England/Downton Abbey-esque. What do you think?

Since you usually have to buy multiple beads at a time, the extras would be great for turning into one-of-a-kind holiday or birthday gifts for friends and family.

DIY Bead/Gem and Gold Wire Bar Necklaces

I don't know if I should actually call this post about DIY bead/gem and gold wire bar necklaces a tutorial, it's so simple that you really don't need more than a few basic instructions!

First, pick out some fairly thick gold wire. I used 40 gauge. Use something thick enough that it will hold its shape and not get bent easily with wear. Then select matching gold (either real, gold-plated, or gold tone - your choice!) chain. Make sure the links are wide enough to slip onto the wire.

Cut a length of wire with the wire-cutting part of your pliers. I usually do about three inches, leaving myself extra that I can cut off later. Take a pair of needle-nose pliers, and form a loop at one end, as shown. Slip the chain onto the loop, and tighten the loop to close it.

Then just add your beads! Make sure their openings are wide enough to fit onto the wire. In the first picture here, you can see I used some diamond shaped green glass beads and then irregular white quartz ones. Put on as many or as few beads as you wish. I made my line of beads about 2 - 2.5 inches long. Leave a bit of wire to form a loop, then cut off the extra. Form your second loop, doing the best you can to make it match the shape of your first one (you can fiddle with both loops after to make them match, or just leave as is - to be honest, people probably won't notice!). Before you tighten it, slip on the other end of your chain. Then close the loop. That's it!

I like my necklaces long, so I used about 30 inches of chain. Since this makes it easy to slip the necklaces over my head, I didn't need a clasp. If you want a shorter necklace that needs a clasp, I'd cut two lengths of chain and slip one end of each onto each loop, and then add your clasps. When you do this part, remember that one side of the clasp (the one with the hook you open) will be longer than the other. So, make that section of chain just a bit shorter so that when you line up each piece of chain with your clasp pieces, the total lengths end up being equal. Is this clear? If not, let me know and I'll add a picture!

Since these bar necklaces have sparkle and shine, they'd be make great accessories for holiday parties. They also make inexpensive, easy Christmas and holiday gifts for your friends and family!

DIY Anchor Leather Bracelet Tutorial

If you saw my DIY bracelet post featuring gold tube beads and leather, you may remember that I promised a bonus project to use up your extra leather cord. 

I used my extra pieces to make this anchor and leather bracelet in two colors. It's just as easy as the original project!

Take your extra cord, and measure around your wrist. You can make it fairly snug, or larger like a bangle. Up to you! Sometimes I do this with a piece of twine or other string, instead of using the cord I'm going to be cutting. 

This is the total length of your anchor charm, end caps, jump rings, clasp, and cord. It helps to lay everything out on your work surface. For the lengths of cord on either side of the anchor, you'll want to double them and note that some of the length will be inside the end cap (so add a few millimeters if you want the bracelet to be snug).

I decided to go with this gold anchor charm, since it had space on both ends for me to string cord. I'll be stringing the round leather cord through the loop on the top, and around the prongs at the bottom of the anchor.

I used gold because I like how it contrasts with red and blue, but you can use whatever metal color you like.

Take your two lengths of cord, and string them as shown. Don't worry about making them completely even - you can do that in the next step.

Find some gold tube crimp beads. These ones are 7.5mm on the inside, so they were wide enough to accommodate two widths of my 3mm cord.

Even up your cord lengths so they are folded perfectly in half. Add a crimp bead near where you strung your cord on either end, and use needle-nose or jeweler's pliers to tighten. Be careful not to tighten too much, however. You want the two sides of cord to lay flat next to each other, rather than stacking on top of each other.

Also, don't put a crimp bead too close to the prongs at the bottom. Leave a bit of space so that the anchor charm will lay flat when you wear the bracelet. If you put the crimp bead too close, it will end up right under the anchor charm instead of next to it, and won't look right.

Add your end caps, as described in the gold tube and leather bracelet post. Let the glue dry thoroughly before moving on to the next step.

Add jumps rings and a clasp to the end caps, and your bracelet is finished. You can see the blue version I made here.

This nautical-themed bracelet is great for summer, but also works well for adding a touch of the sea and ocean to your outfit year-round. Like the gold tube and leather bracelets, this anchor bracelet would make a thoughtful handmade Christmas or holiday gift!

DIY Leather and Gold Tube Bracelets Tutorial

These leather and gold tube bracelets seem to be everywhere lately. The good news is that you can make your own custom version very easily, in exactly the colors you want! You can also make more for friends and family members - they'd make great handmade Christmas or holiday gifts.

First, decide which color cord you'd like. I went with bright red, since I like how it contrasts with gold. You could also use silver or brass findings, if you'd prefer a different metal.

I used 3mm round cord, so it wouldn't be too thick or too thin. You need round cord to go with the tube beads - they just won't sit right on flat cord.

I threw in some blue cord as well, just for contrast. This one is a very bright, indigo blue.

Other than gold tube beads (not shown), you'll need a few other types of findings. For the record, since my cord was 3mm, I used 4mm tube beads. 3mm would be too tight, but 5mm would be too big. Try to go only 1mm over your cord width.

You'll need to choose a clasp. I went with these gold lobster ones. They make it much easier to put on bracelets yourself than other types of clasps.

You'll need some jump rings as well. I went with ones that are 4.5mm across inside (6mm total). You could use a slightly smaller one if you'd like, but I wouldn't go any larger.

You'll need end caps for your cord. I went with these flat ones, so I could fit two lengths of cord inside. This gives your bracelets a "stacked" look, while halving the number of clasps you have to open and close! You could use single ones, or larger ones (say, for 3 or 4 lengths of cord). These ones are 7mm x 3mm.

I measured my cord by wrapping it around my wrist and then cutting. Remember that adding end caps, jump rings, and clasps will add a bit of length to your bracelet. So if you don't want them to be too loose and bangle-y, go with a slightly shorter length. Make sure your lengths are the same if you'll be using the double end caps (or larger). Otherwise, they'll bunch up in strange ways instead of sitting neatly on top of each other.

Slide a gold tube bead onto each length of cord. With one length of cord, I tried adding a dab of glue in the middle of cord and then stringing the bead over it to keep it from moving around. Let's just say that the glue got pushed around and went everywhere *but* inside the tube! I found I didn't need it with the other lengths - the tube beads are tight enough on the cord not to slide around much (if at all).

Attach your end caps. I used a dab of jewelry-appropriate glue on the inside of the cap, just to make sure the cords don't slip out. The cords will fit very tightly into the cap, but I just wanted a little extra security.

I chose to use the same colors of cord in each, but you could do multiple colors. Play around and see what you like the best!

When the glue has dried completely (follow the directions on the bottle/jar), add a jump ring to one end and a jump ring & clasp to the other. Here's what your finished bracelets will look like unclasped!

Here are the finished bracelets, stacked on top of each other like they would be on a wrist. Make as many or as few as you like - it's very easy to customize these in every way.

In my next post, I'll have a bonus project to use up your extra lengths of cord!